Product ID:PYROPLEX EP 1
MSDS Date:09/10/1990
FSC:9150
NIIN:00F009581
MSDS Number: BHLDP

DRYDEN OIL COMPANY

9300 PULASKI HIGHWAY
BALTIMORE, MD 21220
US

Emergency Phone: 1-800-777-1466

Info Phone: 1-800-777-1466

Cage: 40310

DRYDEN OIL CO INC

BALTIMORE, MD 21220 US

Telephone: 301-574-5000

Cage: 40310

RESIDUAL OILS (PETROLEUM), HYDROTREATED

CAS: 64742-57-0

Fraction By Weight: <85%

ACGIH TLV: 5 MG/CUM

ADDITIVES

Fraction By Weight: <15%

OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: <85%

SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: <85%

OSHA PEL 5 MG/CUM (MIST)

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INGESTION:
RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INGESTION: RELATIVELY
NON-TOXIC.

First Aid:EYES: FLUSH W/CLEAR WATER FOR 15 MINS. SKIN: WASH THOROUGHLY
W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. INHALATION: IF
OVERCOME BY VAPOR FROM HOT PRODUCT, IMMEDIATELY REMOVE FROM
EXPOSURE. ADMI NISTER OXYGEN. OBTAIN MEDICAL ATTENTIONIN ALL CASES.

Flash Point Method:COC
Flash Point:460F
Extinguishing Media:FOAM, WATER SPRAY OR FOG, DRY CHEMICAL, CO2 &
VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL.
Unusual Fire/Explosion Hazard:THEY MAY EXPLODE & CAUSE INJURY OR DEATH.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH, OR
OTHER SUITABLE ABSORBENT MATERIAL TO THE SPILL AREA. KEEP PRODUCT
OUT OF SEWERS & WATERCOURSES BY DIKING OR IMPOUNDING. ADVISE
AUTHORITIES IF THE PRODUCT HAS ENTERED OR MAY ENTER SEWERS &
WATERCOURSES.

Handling and Storage Precautions:"EMPTY" CONTAINERS RETAIN RESIDUE
(LIQUID/VAPOR) & CAN BE DANGEROUS. AVOID BREATHING VAPORS, CONTACT
W/SKIN. KEEP CONTAINERS WHEN NOT IN USE.
Other Precautions:DON'T PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS OR OTHER
SOURCES OF IGNITION: THEY MAY EXPLODE & CAUSE INJURY OR DEATH.
DON'T ATTEMPT TO CLEAN SINCE RESIDUE IS DIFFICULT TO REMOVE.

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE W/ADEQUATE VENTILATION.
Ventilation:USE W/ADEQUATE VENTILATION
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:USE SPLASH GOGGLES OR FACE SHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE & DISCARD IF OIL-SOAKED.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:0. F
Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity:0.89
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:<0.1%
Appearance and Odor:RED, SEMI-SOLID BLAND ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, SPARKS, PILOT LIGHTS, STATIC
ELECTRICITY, OPEN FLAME
Hazardous Decomposition Products:FUMES, SMOKE, CO, SULFUR OXIDES,
ALDEHYDES

Waste Disposal Methods:ASSURE CONFORMITY W/ALL APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.